Cisco APIC Layer 2 Networking Configuration Guide, Release 6.2(x)
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco APIC Layer 2 Networking Configuration Guide, Release 6.2(x)
Updated: July 7, 2026
Want to summarize with AI?
Log inConfigure an interface by editing its port policy group or description settings.
This procedure describes how to edit the configuration of an interface that you previously configured, which enables you to change the port policy group or description of the interface.
You must have at least one interface configured.
Follow these steps to edit an interface configuration:
On the menu bar, choose Fabric > Access Policies.
In the Navigation pane, choose Interface Configuration.
In the work pane, click the ... at the right end of the row for the interface whose configuration you want to edit, then choose Edit Interface Configuration.
In the Edit Policy Group for interface-name dialog, change the configuration as required.
Click Save.
NoteFor any existing configurations done using the node or port profile, you can migrate the entire FEX configuration using the APIC REST API Configuration Procedures.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.