Cisco APIC Layer 2 Networking Configuration Guide, Release 6.2(x)

PDF

Cisco APIC Layer 2 Networking Configuration Guide, Release 6.2(x)

Perform a traceroute between endpoints

Want to summarize with AI?

Log in

Configure a traceroute policy to analyze network paths between source and destination endpoints in your tenant.


Follow these steps to perform a traceroute between endpoints:

Procedure

  1. In the menu bar, click Tenants.

  2. In the submenu bar, click the tenant that contains the source endpoint.

  3. In the Navigation pane, expand the tenant and expand Policies > Troubleshoot.

  4. Under Troubleshoot, right-click on one of the following traceroute policies:

    • Endpoint-to-Endpoint Traceroute Policies and choose Create Endpoint-to-Endpoint Traceroute Policy

    • Endpoint-to-External-IP Traceroute Policies and choose Create Endpoint-to-External-IP Traceroute Policy

    • External-IP-to-Endpoint Traceroute Policies and choose Create External-IP-to-Endpoint Traceroute Policy

    • External-IP-to-External-IP Traceroute Policies and choose Create External-IP-to-External-IP Traceroute Policy

  5. Enter the appropriate values in the dialog box fields and click Submit.

    Note

    For the description of a field, click the help icon (?) in the top-right corner of the dialog box.

  6. In the Navigation pane or the Traceroute Policies table, click the traceroute policy.

    The traceroute policy is displayed in the Work pane.
  7. In the Work pane, click the Operational tab, click the Source Endpoints tab, and click the Results tab.

  8. In the Traceroute Results table, verify the path or paths that were used in the trace.

    Note
    • More than one path might have been traversed from the source node to the destination node.

    • For readability, you can increase the width of one or more columns, such as the Name column.

The traceroute results display the network path or paths traversed between the source and destination endpoints.