Cisco APIC Layer 2 Networking Configuration Guide, Release 6.2(x)

PDF

Cisco APIC Layer 2 Networking Configuration Guide, Release 6.2(x)

Configuration of Breakout Ports

Want to summarize with AI?

Log in

Describes the functionality of breakout cables for splitting high-speed switch ports into multiple independent logical ports. This configuration optimizes connectivity within and across network racks.


Breakout is a port configuration feature that enables high-speed physical ports to function as multiple independent logical ports.

  • Supports splitting 40Gb ports into four 10Gb ports.

  • Supports splitting 100Gb ports into four 25Gb ports.

  • Supports splitting 400Gb ports into four 100Gb ports or two 100Gb ports for NRZ.

Breakout Port Deployment and Configuration

You configure breakout on the down links (access-facing ports) and fabric links of the switches. Fabric links form the connections between leaf switches and spine switches, or between tier 1 and tier 2 leaf switches for multi-tier topologies.

You can configure breakout ports using the following methods:

  • Port profiles and selectors: Configure a breakout leaf port with a leaf interface profile, associate the profile with a switch, and configure the sub-ports.

  • Fabric Access Policies: Use the Fabric > Access Policies > Interface Configuration workflow (available from Cisco Application Policy Infrastructure Controller 6.0(1) release).

  • Inventory workflow: Use the Fabric > Inventory > pod > leaf_name workflow, which utilizes the interface configuration starting from the 6.0(1) release.