Configure intra-EPG isolation for VMware VDS or Microsoft Hyper-V virtual switches using the NX-OS style CLI to prevent communication between endpoints within the same EPG.
Procedure
-
In the CLI, create an intra-EPG isolation EPG:
The following example is for VMware VDS:Example:
apic1(config)# tenant Test_Isolation apic1(config-tenant)# application PVLAN apic1(config-tenant-app)# epg EPG1 apic1(config-tenant-app-epg)# show running-config # Command: show running-config tenant Tenant_VMM application Web epg intraEPGDeny tenant Tenant_VMM application Web epg intraEPGDeny bridge-domain member VMM_BD vmware-domain member PVLAN encap vlan-2001 primary-encap vlan-2002 push on-demand vmware-domain member mininet exit isolation enforce exit exit exit apic1(config-tenant-app-epg)#The following example is for Microsoft Hyper-V Virtual Switch:Example:
apic1(config)# tenant Test_Isolation apic1(config-tenant)# application PVLAN apic1(config-tenant-app)# epg EPG1 apic1(config-tenant-app-epg)# show running-config # Command: show running-config tenant Tenant_VMM application Web epg intraEPGDeny tenant Tenant_VMM application Web epg intraEPGDeny bridge-domain member VMM_BD microsoft-domain member domain1 encap vlan-2003 primary-encap vlan-2004 microsoft-domain member domain2 exit isolation enforce exit exit exit apic1(config-tenant-app-epg)# -
Verify the configuration:
Example:
show epg StaticEPG detail Application EPg Data: Tenant : Test_Isolation Application : PVLAN AEPg : StaticEPG BD : VMM_BD uSeg EPG : no Intra EPG Isolation : enforced Vlan Domains : VMM Consumed Contracts : VMware_vDS-Ext Provided Contracts : default,Isolate_EPG Denied Contracts : Qos Class : unspecified Tag List : VMM Domains: Domain Type Deployment Immediacy Resolution Immediacy State Encap Primary Encap -------------------- --------- -------------------- -------------------- -------------- ---------- ---------- DVS1 VMware On Demand immediate formed auto auto Static Leaves: Node Encap Deployment Immediacy Mode Modification Time ---------- ---------------- -------------------- ------------------ ------------------------------ Static Paths: Node Interface Encap Modification Time ---------- ------------------------------ ---------------- ------------------------------ 1018 eth101/1/1 vlan-100 2016-02-11T18:39:02.337-08:00 1019 eth1/16 vlan-101 2016-02-11T18:39:02.337-08:00 Static Endpoints: Node Interface Encap End Point MAC End Point IP Address Modification Time ---------- ------------------------------ ---------------- ----------------- ------------------------------ ------------------------------ Dynamic Endpoints: Encap: (P):Primary VLAN, (S):Secondary VLAN Node Interface Encap End Point MAC End Point IP Address Modification Time ---------- ------------------------------ ---------------- ----------------- ------------------------------ ------------------------------ 1017 eth1/3 vlan-943(P) 00:50:56:B3:64:C4 --- 2016-02-17T18:35:32.224-08:00 vlan-944(S)