Cisco Catalyst Center Third-Generation Appliance Installation Guide, Release 3.1.x

PDF

Additional HA deployment considerations

Updated: April 3, 2026

Want to summarize with AI?

Log in

Overview

Additional configurations for an existing HA deployment.

For an existing HA deployment, these additional configurations must be made.

Telemetry

If you enabled telemetry for a device without enabling the VIP, complete these steps:

Procedure

1.

Use the sudo maglev-config update command to update the cluster VIP.
2.

Disable telemetry on the device:

  1. From the Catalyst Center home page, select Network Telemetry from the Tools area.

    The Network Telemetry window appears.

  2. Click the Site View tab.

  3. Check the check box of the device on which you want to disable telemetry, and then choose Actions > Disable Telemetry.
3.

Reenable telemetry using the profile associated with the device previously.

Wireless controller

You must update the wireless controllers in your network with the new VIP of Catalyst Center.