Overview
This guide explains how to install the Catalyst Center third-generation appliance. Catalyst Center provides end-to-end network visibility and uses network insights to optimize network performance and deliver the best user and application experience.
Review the Catalyst Center Appliance Features
Explains the Catalyst Center appliance, which provides rack-mountable physical hardware in different configuration sizes, featuring Intel Xeon processors, RAID storage, multiple Ethernet ports with NIC bonding support, redundant power supplies, and integrated management through Cisco IMC firmware. Provides links to appliance hardware specifications. Provides links to the topics that describe the front and rear panels of the third-generation appliances. Provides links to the physical specifications for the third-generation appliances.
Plan the Deployment
Describes a planning workflow for deployment that includes reviewing cabling and switching requirements, gathering IP addressing and subnet information, preparing secure internet access, configuring firewalls and security policies, and collecting necessary configuration and first-time setup information.
Install the Appliance
Summarizes the physical installation process of the Catalyst Center appliance, including unpacking, inspecting, reviewing installation warnings and guidelines, rack requirements, connecting and powering on the appliance, and checking the LEDs.
Prepare the Appliance for Configuration
Explains how to prepare the Catalyst Center appliance for configuration, including enabling browser access to the Cisco IMC, executing preconfiguration tasks, and optionally reinstalling the Catalyst Center software before proceeding to appliance configuration.
Configure the Appliance Using the Maglev Wizard
Shows how to configure the Catalyst Center appliance using the Maglev Configuration wizard, which includes setting up network interfaces, cluster nodes, and other appliance settings.
Configure the 32-Core and 56-Core Appliances Using the Browser-Based Wizard
Explains how to configure either a three-node cluster's primary node or a standalone appliance (32-core or 56-core) using the Install Configuration wizard.
Configure the 80-Core Appliance Using the Browser-Based Wizard
Shows how to configure either a three-node cluster's primary node or a standalone Catalyst Center 80-core appliance using the Install Configuration wizard, which simplifies the setup by configuring the Enterprise, Management, and Internet interfaces on the same port with default settings.
Complete First-Time Setup
Provides information on first-time setup for the Catalyst Center appliance, including logging into the GUI with an HTTPS-enabled browser, initiating the Quick Start workflow to discover managed devices, and enabling telemetry collection.
Troubleshoot the Deployment
Offers troubleshooting procedures for the appliance deployment, including logging out of the GUI, reconfiguring the appliance using the Maglev Configuration wizard, power cycling the appliance, and guidance on managing appliance hardware.
Review High Availability Cluster Deployment Scenarios
Explains HA cluster deployment scenarios for Catalyst Center.