Cisco Catalyst Center Third-Generation Appliance Installation Guide, Release 3.1.x

PDF

Configure SNMP properties

Updated: April 3, 2026

Want to summarize with AI?

Log in

Overview

Information about configuring SNMP properties, including retries and timeouts.

You can configure the retry and timeout values for SNMP.

Before you begin

Only a user with SUPER-ADMIN-ROLE permissions can do this procedure. For more information, see the Cisco Catalyst Center Administrator Guide.

Procedure

1.

From the main menu, choose System > Settings > Device Settings > SNMP.
2.

Configure these fields:

  • Retries: Number of attempts allowed to connect to the device. Valid values are from 1 to 3. The default is 3.

  • Timeout (in Seconds): Number of seconds Catalyst Center waits when trying to establish a connection with a device before timing out. Valid values are from 1 to 300 seconds, in intervals of 5 seconds. The default is 5 seconds.
3.

Click Save.

Note

To return to the default settings, click Reset and Save.