[an error occurred while processing this directive]

Cisco ONS 15454 Series Multiservice Provisioning Platforms

Field Notice 12157: Release 1.03-RTRV-ALM-LOG Does Not Function

April 12, 2000

Products Affected



Cisco ONS 15454

Formerly Cerent 454

Problem Description

The Transaction Language 1 (TL1) command RTRV-ALM-LOG is not functional in Release R1.03.


In Release R1.03:

  • The TL1 command RTRV-ALM-ALL is fixed.

  • An improperly generated BellCore GR-253-Core Channel Mismatch Alarm is fixed.

  • The TL1 command RTRV-ALM-LOG is not functional.

Problem Symptoms

The RTRV-ALM-LOG TL1 command is not functional in Release R1.03 and has been fixed in this release. The command gives the ability to access a stored record of the most recent alarms.


If your system is running release R1.02, you are not using TL1, and you are not interoperating with other vendor. s equipment, an upgrade to release R1.04 is not required.

If you must upgrade your system, please follow the upgrade procedure in the Cerent User Documentation, which can be found on the software CD. This release incorporates all the fixes of Release R1.03 and corrects the problems outlined in Cisco Field Notice 1: Release 1.0 - Improperly Generated Protection Switch Channel Mismatch Alarm.

The Cisco Field Service organization will contact you about distribution of this software release.

For More Information

If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:

Updated: May 27, 2003 Document ID: 22211

[an error occurred while processing this directive]