Use this procedure to view PSM circuits in Service Assurance. You can view the selected PSM circuit path in the Detailed Service Path screen and cross-launch Cisco Optical Site Manager for target PSM equipment.
Use this procedure to view PSM circuit paths and cross-launch Cisco Optical Site Manager from the Service Assurance application for protection-switch operations.
You can view the selected PSM circuit path in the Detailed Service Path screen and cross-launch Cisco Optical Site Manager for target PSM equipment.
Before you begin
Follow these steps to view PSM circuits in Service Assurance:
Procedure
| 1. | Select the PSM circuit you created from Services. |
|
| 2. | Click on the Detailed Service Path screen. The PSM path is displayed in the circuit. You can also cross-launch Cisco Optical Site Manager from the selected equipment.
|
The Service Assurance application displays the selected PSM circuit path.