Cisco ME 1200 Series Carrier Ethernet Access Device Web Interface User Guide, Cisco IOS 15.6(1)SN and Later Releases

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: February 4, 2016

Chapter: Monitoring UDLD

UDLD Status

Monitoring UDLD

UDLD Status

Related Concepts

UDLD Port Configuration

UDLD Status

This option displays the UDLD status of the ports.

UDLD port status

UDLD Admin State: The current port state of the logical port, Enabled if any of the state(Normal, Aggressive) is enabled.
Device ID(local): The ID of Device.
Device Name(local): Name of the Device.
Bidirectional State: The current state of the port.

Neighbour Status

Port: The current port of neighbour device.
Device ID: The current ID of neighbour device.
Link Status: The current link status of neighbour port.
Device Name: Name of the Neighbour Device.

Related Information

Configuring UDLD

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)