Routing Configuration Guide, Cisco Catalyst SD-WAN Releases 17.x

PDF

Verify VRRP-Aware PIM Using the CLI

Updated: February 6, 2026

Overview

Use this procedure to check the redundancy status and configuration of routers operating in a high-availability pair.

Sample VRRP-aware PIM configuration on router 1: 
interface Vlan13
no shutdown
arp timeout 1200
vrf forwarding 1
ip address 10.0.0.1 255.255.255.0
ip pim sparse-mode
ip pim redundancy 1 vrrp dr-priority 200
ip tcp adjust-mss 1350
ip mtu 1500
ip igmp version 3
vrrp 1 address-family ipv4
vrrpv2
address 10.0.0.3
priority 200
timers advertise 100
track omp shutdown
vrrs leader 1
exit

Sample VRRP-aware PIM configuration on router 2:

interface Vlan13
no shutdown
arp timeout 1200
vrf forwarding 1
ip address 10.0.0.2 255.255.255.0
ip pim sparse-mode
ip pim redundancy 1 vrrp dr-priority 200
ip tcp adjust-mss 1350
ip mtu 1500
ip igmp version 3
vrrp 1 address-family ipv4
vrrpv2
address 10.0.0.3
priority 200
timers advertise 100
track omp shutdown
vrrs leader 1
exit