Routing Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x

Feature history for RIP

Updated: March 9, 2026

Want to summarize with AI?

Overview

Lists the development milestones and release information for RIP, including feature description.

This table describes the developments of this feature, by release.

Table 1. Feature history
Feature Name	Release Information	Description
RIPv2 support on Cisco IOS XE Catalyst SD-WAN devices	Cisco IOS XE Catalyst SD-WAN Release 17.7.1a Cisco vManage Release 20.7.1 Cisco SD-WAN Release 20.7.1	RIPv2 support on Cisco IOS XE Catalyst SD-WAN devices enables you to configure RIPv2 on these devices. Routers redistribute RIPv2 routes to Overlay Management Protocol (OMP) for advertisement in the Cisco Catalyst SD-WAN overlay, and to Open Shortest Path First version 3 (OSPFv3) for service-side routing
RIPng (IPv6) support on Cisco IOS XE Catalyst SD-WAN devices	Cisco IOS XE Catalyst SD-WAN Release 17.10.1a Cisco vManage Release 20.10.1	RIPng (IPv6) Support on Cisco IOS XE Catalyst SD-WAN devices adds support for IPv6 addresses and prefixes. This feature facilitates redistribution of connect, static, Overlay Management Protocol (OMP), and Open Shortest Path First (OSPF) routes into Routing Information Protocol next generation (RIPng).

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.