Routing Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x

PDF

Verification commands for RIPng configuration

Updated: March 9, 2026

Want to summarize with AI?

Log in

Overview

Provides details about the commands used to confirm the status of IPv6 routing configurations and VRF table entries. Use these verification steps to inspect prefix lists and redistributed routes to ensure that RIPng is successfully communicating with other protocols.

This section details the essential verification commands used to confirm the Routing Information Protocol next generation (RIPng) configurations and operational status on Cisco IOS XE Catalyst SD-WAN devices. These commands are crucial for inspecting configured settings and routing table entries to ensure proper RIPng functionality within the network.

Display RIPng routes in the VRF routing table

The following is a sample output from the show ipv6 route vrf command displaying the router RIPng configurations: 

Device# show ipv6 route vrf 1
IPv6 Routing Table - 1 - 11 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
       B - BGP, R - RIP, H - NHRP, I1 - ISIS L1
       I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
       EX - EIGRP external, ND - ND Default, NDp - ND Prefix, DCE - Destination
       NDr - Redirect, RL - RPL, O - OSPF Intra, OI - OSPF Inter
       OE1 - OSPF ext 1, OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1
       ON2 - OSPF NSSA ext 2, la - LISP alt, lr - LISP site-registrations
       ld - LISP dyn-eid, lA - LISP away, le - LISP extranet-policy
       lp - LISP publications, ls - LISP destinations-summary, a - Application
       m - OMP
R   1100::/64 [120/2]
     via FE80::20C:29FF:FE2E:13FF, GigabitEthernet2
R   2000::/64 [120/2]
     via FE80::20C:29FF:FE51:762F, GigabitEthernet2
R   2001:10::/64 [120/2]
     via FE80::20C:29FF:FE82:D659, GigabitEthernet2
R   2500::/64 [252/11], tag 44270
     via FE80::20C:29FF:FEE1:5237, GigabitEthernet2
C   2750::/64 [0/0]
     via GigabitEthernet2, directly connected
L   2750::1/128 [0/0]
     via GigabitEthernet2, receive
R   2777::/64 [252/11], tag 44270
     via FE80::20C:29FF:FEE1:5237, GigabitEthernet2
m   2900::/64 [251/0]
     via 192.168.1.5%default
R   3000::/64 [120/2]
     via FE80::20C:29FF:FE2E:13FF, GigabitEthernet2
R   3400::/64 [252/11], tag 44270
     via FE80::20C:29FF:FE51:762F, GigabitEthernet2
L   FF00::/8 [0/0]
     via Null0, receive