Routing Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x

PDF

Configure a router as a transport gateway

Updated: March 9, 2026

Want to summarize with AI?

Log in

Configure a router as a transport gateway using a CLI template

Before you begin

By default, CLI templates execute commands in global configuration mode.

For more information about using CLI templates, see CLI Add-On Feature Templates and CLI Templates.

Procedure

1.

Enter system configuration mode.

system
2.

Enable transport gateway functionality.

transport-gateway enable
Note

To disable transport gateway functionality, use the no form of the command.

 
system
  transport-gateway enable

Configure a router as a transport gateway using Cisco SD-WAN Manager

Procedure

1.

From the Cisco SD-WAN Manager menu, choose Configuration > Templates.
2.

Click Feature Templates.
3.

Do one of the following:

  • To create a new System template, click Add Template, choose a device type, and click Cisco System.

  • To edit an existing System template, locate a System template in the table of existing feature templates, click … adjacent to the template, and choose Edit.
4.

In Basic Configuration, in the Transport Gateway field, choose On.
5.

Click Save if creating a new template, or Update if editing an existing template.