Routing Configuration Guide, Cisco IOS XE Catalyst SD-WAN Release 17.x

Feature history for Hub-and-Spoke

Updated: March 9, 2026

Want to summarize with AI?

Overview

Lists the development milestones and release information for Hub-and-Spoke, including feature description.

This table describes the developments of this feature, by release.

Table 1. Feature history
Feature Name	Release Information	Description
Hub-and-Spoke configuration method	Cisco IOS XE Catalyst SD-WAN Release 17.12.1a Cisco Catalyst SD-WAN Manager Release 20.12.1	Hub-and-spoke configuration simplifies the process of configuring a hub-and-spoke topology. This approach makes complex centralized control policy unnecessary. The configuration requires only a few simple configurations: a single command each on: The Cisco Catalyst SD-WAN Controllers serving a network A router that serves as a hub The routers that operate as spokes.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.