Overview
Lists the development milestones and release information for OMP, including feature description.
This table describes the developments of this feature, by release.
| Feature Name |
Release Information |
Description |
|---|---|---|
| OMP Route Aggregation |
Cisco IOS XE Catalyst SD-WAN Release 17.13.1a Cisco vManage Release 20.3.1 |
This feature is an enhancement where OMP route aggregation is performed only for the routes that are configured for route redistribution to avoid black hole routing. This enhancement is applicable for OSPF, Connected, Static, BGP and other protocols only if the redestribution is requested. |
| Mapping Multiple BGP Communities to OMP Tags |
Cisco IOS XE Catalyst SD-WAN Release 17.2.1r | This feature allows you to display information about OMP routes on Cisco Catalyst SD-WAN Controller and Cisco IOS XE Catalyst SD-WAN devices. OMP routes carry information that the device learns from the routing protocols running on its local network, including routes learned from BGP and OSPF, as well as direct, connected, and static routes. For more information on the show sdwan omp routes command, refer show sdwan omp routes. |
| Increased OMP Path Limit for Cisco Catalyst SD-WAN Controllers |
Cisco IOS XE Catalyst SD-WAN Release 17.5.1a | This feature extends the limit on the number of OMP routes that can be exchanged between Cisco Catalyst SD-WAN Controllers to 128. Prior to this release, the limit was 16. |
| OMP RIB-Out Optimization using TLOC Path |
Cisco IOS XE Catalyst SD-WAN Release 17.18.2 |
This feature introduces an optimization to the OMP protocol by flattening vRoute RIB-Outs from a per-TLOC (Transport Locator) basis to a per-SysIP (System IP) basis. This significantly reduces memory consumption on Cisco Catalyst SD-WAN Controllers, improves overall scalability, and enhances convergence performance in large-scale SD-WAN deployments. |