Introduces enhanced EVPN services and failover techniques, including service consolidation on Ethernet segments, hierarchical EVPN access, and high availability using Layer 2 Fast Reroute for E-LAN and E-Line services.
EVPN multiple services per Ethernet segment
Explains EVPN support for multiple services on a single Ethernet segment, highlighting key benefits, supported service types, and providing step-by-step configuration procedures to implement these capabilities.
Hierarchical EVPN access pseudowire
Introduces hierarchical EVPN access pseudowire, describing the architecture and operational workflow, and providing configuration guidance for deploying hierarchical pseudowire access within EVPN environments.
Layer 2 fast reroute
Describes Layer 2 fast reroute mechanisms for E-LAN and E-Line services, including supported services, traffic loss mitigation, benefits, operational workflows, deployment restrictions, and configuration procedures for enhancing Layer 2 network resilience.
EVPN and L3VPN using route type-5 over BGP-LU with SR
Details integration of EVPN and L3VPN using route type-5 over BGP-LU with SR, summarizing key concepts, associated benefits, and providing authoritative references for deploying these advanced routing solutions.
Sub-second convergence for EVPN with BGP PIC-edge
Explains sub-second convergence for EVPN with BGP PIC-edge, focusing on network resiliency improvements, supported deployment scenarios, benefits, limitations, operational process, and configuration steps for rapid failover.
Layer 3 EVPN IGMP and MLD state synchronization
Introduces Layer 3 EVPN IGMP and MLD state synchronization, which synchronizes IPv4 IGMP and IPv6 MLD states across multiple PE devices, ensures reliable multicast delivery for FTTH networks, and simplifies configuration by eliminating complex L2 and IRB requirements using L3 subinterfaces.
Virtual Ethernet segment
Introduces virtual Ethernet segments, describing their role in aggregating physical Ethernet links, enabling multihoming for EVPN over MPLS, supporting redundancy and load balancing, and outlines feature availability across various Cisco modular and fixed system platforms.
EVPN E-Line with FXC service in VLAN unaware mode
Introduces EVPN E-Line with FXC service in VLAN unaware mode, outlining its ability to aggregate multiple ACs per ES, reduce BGP state complexity, avoid VLAN failure signaling over BGP, and support both single-homing and multihoming for scalable, flexible connectivity.