Describes E-Label display features for APs, including compliance status monitoring for device models and configuration procedures using the GUI to ensure adherence to electronic labeling requirements.

E-LABEL compliance status

A regulatory requirement for wireless APs is a set of standards that:

mandates compliance with evolving legal or formal regulations,
covers aspects such as operational frequencies and power levels, and
include the implementation of technologies like the "E-label" for compliance.

Starting with the Cisco IOS XE 17.18.1 version, the E-Label digital labeling feature became accessible via the controller's GUI. This feature enables seamless integration of new regulatory approvals concerning the E-Label compliance without necessitating physical modifications to the devices.

Feature history for access point upgrade management enhancements

Table 1. Feature history
Release	Feature Information
Cisco IOS XE 17.18.1	The E-Label digital labeling feature is accessible via the controller's GUI and enables seamless integration of new regulatory approvals for wireless APs.

Starting with the Cisco IOS XE 17.18.1 release, this digital labelling feature is available via the controller’s GUI, enabling seamless integration of new regulatory approvals without requiring physical modifications to the device.

E-Label compliance status of AP models

These are the AP models that support E-Label compliance status

Cisco Catalyst Wi-Fi 6 APs
Cisco Catalyst Wi-Fi 6E APs
Cisco Catalyst Wi-Fi 7 APs


Wi-Fi Technology	AP Model
Cisco Catalyst Wi-Fi 6 APs	Cisco Catalyst 9105 AXI/AXW APs
	Cisco Catalyst 9115 AXI/AXE APs
	Cisco Catalyst 9117 AXI APs
	Cisco Catalyst 9120 AXI/AXE/AXP APs
	Cisco Catalyst 9130 AXI/AXE/AXE-STA APs
	Cisco Catalyst 9124 AXI/AXE/AXD APs
Cisco Catalyst Wi-Fi 6E APs	Cisco Catalyst 9136I APs
	Cisco Catalyst Wireless 9166I/D1 APs
	Cisco Catalyst Wireless 9164I APs
	Cisco Catalyst Wireless 9162I APs
	Cisco Catalyst Wireless 9163E APs
Cisco Catalyst Wi-Fi 7 APs	Cisco Catalyst Wireless 9178I APs
	Cisco Catalyst Wireless 9176I/D1 APs
	Cisco Catalyst Wireless 9172I/H APs

Configure AP E-Label compliance status (GUI)

Ensure regulatory compliance of the AP E-Label by configuring its status through the GUI.

This task involves verifying the compliance status of an AP E-Label via the GUI.

To configure the AP E-Label compliance status, perform these steps

Procedure

	1.	Choose Monitoring > Wireless > AP Statistics. Note All the APs connected to the controller are automatically displayed.
	2.	Click the AP to view the regulatory compliance status.
	3.	Go to 360 View.
	4.	Click the Click here for Legal and Regulatory information. Note This option will be under the AP Country Code detail.

A pop-up is displayed with the regulatory information for the selected AP, showing compliance details across various countries.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.