Explains how to configure Dynamic Host Configuration Protocol services for wireless networks, including internal server setup, relay configuration, and FlexConnect requirements.
Dynamic Host Configuration Protocol
Describes a network protocol that dynamically assigns IP addresses to devices on a network for IP communication.
Configure DHCP for WLANs
Provides instructions for configuring DHCP scopes using GUI and CLI, including setting IP address ranges, subnet masks, lease options, and network parameters such as routers, DNS and NetBIOS name servers, domains, and DHCP options for wireless clients.
Configure internal DHCP server
Provides instructions for configuring an internal DHCP server to automatically assign IP addresses to wireless clients. It includes steps for adjusting DHCP settings within a wireless policy profile using both the web interface and CLI commands. The configuration covers setting up centralized DHCP services, defining network pools, exclusions, and static IP reservations. Additionally, it outlines commands for verifying the DHCP configuration, including client binding checks and analyzing DHCP relay and packet punt statistics.
Configure DHCP-Required for FlexConnect
Details the FlexConnect DHCP-required feature, ensuring wireless clients in local switching mode obtain IP addresses through DHCP. Includes FlexConnect-specific restrictions and limitations. Configuration is possible through the GUI or commands, with specific commands available for verification.