Passive clients
Passive Clients refers to wireless devices such as printers and devices configured using a static IP address.
Enable passive client for FlexConnect mode (CLI)
Enable the passive client feature when the device operates in FlexConnect mode to support client devices that do not initiate traffic themselves.
DHCP broadcast support for workgroup bridges
Explains how enabling the dhcp broadcast command under the FlexConnect profile ensures DHCP replies are broadcasted, addressing IP assignment issues for devices behind third-party WGBs that do not handle broadcast DHCP requests properly.
Enable passive client on WLAN policy profile (GUI)
Use this task to enable passive client support on a WLAN policy profile, allowing devices that do not transmit packets to remain connected on the WLAN.
Enable passive client on WLAN policy profile (CLI)
Use this task to enable the passive client feature on a selected WLAN policy profile using commands. This allows devices that do not actively communicate with the controller to be recognized and managed on the WLAN.
Enable ARP broadcast on VLAN (GUI)
Use this task to enable ARP broadcast functionality for VLANs through the GUI, allowing the VLAN to propagate ARP requests.
Enable ARP broadcast on VLAN (CLI)
Configure ARP broadcast on a specified VLAN to allow devices within that VLAN to respond to ARP requests using commands.
Passive client in fabric deployment
This topic outlines the characteristics and requirements for supporting passive clients within a fabric network deployment.
Verify passive client configuration
Verify passive client configuration.