Step 1

From Cisco Unified CM Administration, choose Device > Device Settings > Common Device Configuration.

Step 2

Perform one of the following tasks:

• Click Find to modify an existing common device configuration and choose a common device configuration from the resulting list.
• Click Add New to add a new common device configuration.

Step 3

Configure the fields on the Common Device Configuration window. For more information on the fields and their configuration options, see Online Help.

Step 4

Click Save.

Step 1

Choose System > Enterprise Parameters.

Step 2

Configure the MLPP enterprise parameters on the Enterprise Parameters Configuration window. See the Related Topics section for more information about the parameters and their configuration options.

Step 3

Click Save.

Step 1

From Cisco Unified CM Administration, choose Call Routing > Class of Control > Partition.

Step 2

Click Add New to create a new partition.

Step 3

In the Partition Name, Description field, enter a name for the partition that is unique to the route plan.

Step 4

Enter a comma (,) after the partition name and enter a description of the partition on the same line.

Step 5

To create multiple partitions, use one line for each partition entry.

Step 6

From the Time Schedule drop-down list, choose a time schedule to associate with this partition.

Step 7

Select one of the following radio buttons to configure the Time Zone:

• Originating Device—When you select this radio button, the system compares the time zone of the calling device to the Time Schedule to determine whether the partition is available is available to receive an incoming call.
• Specific Time Zone—After you select this radio button, choose a time zone from the drop-down list. The system compares the chosen time zone to the Time Schedule to determine whether the partition is available is available to receive an incoming call.

Step 8

Click Save.

Step 1

From Cisco Unified CM Administration, choose Call Routing > Class of Control > Calling Search Space.

Step 2

Click Add New.

Step 3

In the Name field, enter a name.

Step 4

In the Description field, enter a description.

Step 5

From the Available Partitions drop-down list, perform one of the following steps:

• For a single partition, select that partition.
• For multiple partitions, hold down the Control (CTRL) key, then select the appropriate partitions.

Step 6

Select the down arrow between the boxes to move the partitions to the Selected Partitions field.

Step 7

(Optional) Change the priority of selected partitions by using the arrow keys to the right of the Selected Partitions box.

Step 8

Click Save.

Step 1

From Cisco Unified CM Administration, choose Call Routing > Route/Hunt > Route Pattern.

Step 2

Perform one of the following tasks:

• To modify the settings for an existing route pattern, enter search criteria, click Find, and then choose an existing route pattern from the resulting list.
• To add a new route pattern, click Add New.

Step 3

Configure the fields on the Route Pattern Configuration window. See the Related Topics section for more information about the fields and their configuration options.

Step 4

Click Save.

Step 1

In Cisco Unified CM Administration, choose Call Routing > Translation Pattern.

Step 2

Perform one of the following tasks:

• To modify the settings for an existing translation pattern, enter search criteria, click Find, and choose an existing Translation Pattern from the resulting list.
• To add a new translation pattern, click Add New.

Step 3

From the MLPP Precedence drop-down list, choose one of the following settings for this translation pattern:

• Executive Override—Highest precedence setting for MLPP calls.
• Flash Override—Second highest precedence setting for MLPP calls.
• Flash—Third highest precedence setting for MLPP calls.
• Immediate—Fourth highest precedence setting for MLPP calls.
• Priority—Fifth highest precedence setting for MLPP calls.
• Routine—Lowest precedence setting for MLPP calls.
• Default—Does not override the incoming precedence level but rather lets it pass unchanged.

Step 4

From the Resource-Priority Namespace Network Domain drop-down list, choose a resource priority namespace network domain that you configured.

Step 5

From the Calling Search Space drop-down list, choose the calling search space that you configured.

Step 6

Click Save.

Step 1

From Cisco Unified CM Administration, choose Device > Gateway

Step 2

Perform one of the following tasks:

• To modify the settings for an existing gateway, enter search criteria, click Find, and choose a gateway from the resulting list.

• To add a new gateway:

  1. Click Add New.

  2. From the Gateway Type drop-down list, choose one of the supported gateway models.

  3. Click Next.

Step 3

Configure the MLPP fields on the Gateway Configuration window. See the Related Topics section for more information about the fields and their configuration options.

Step 4

Click Save.

Step 1

From Cisco Unified CM Administration, choose Device > Phone.

Step 2

Enter search criteria.

Step 3

Click Find and choose a phone from the resulting list.

Step 4

Configure the MLPP fields on the Phone Configuration window. See the Related Topics section for more information about the fields and their configuration options.

Step 1

From Cisco Unified CM Administration in the Device Configuration window, click Add a new DN for the appropriate line.

Step 2

In the Target (Destination) field, enter the number to which MLPP precedence calls should be diverted if this directory number receives a precedence call and neither this number nor its call forward destination answers the precedence call.

Step 3

From the MLPP Calling Search Space drop-down list, choose the calling search space to associate with the MLPP alternate party target (destination) number.

Step 4

In the MLPP No Answer Ring Duration (seconds), enter the number of seconds (between 4 and 60) after which an MLPP precedence call is directed to this directory number alternate party if this directory number and its call-forwarding destination have not answered the precedence call.

Step 5

Click Save.

Step 1

From Cisco Unified CM Administration, choose Device > Device Settings > Device Profile.

Step 2

Perform one of the following tasks:

• To modify the settings for an existing device profile, enter search criteria, click Find, and then choose an existing device profile from the resulting list.
• To add a new device profile:

  • Click Add New.

  • From the Device Profile Type drop-down list, choose a profile type.

  • Click Next.

  • From the Device Protocol drop-down list, choose either SIP or SCCP.

Step 3

Click Next.

Step 4

From the MLPP Domain drop-down list, choose an MLLP domain that you configured.

Step 5

From the MLPP Indication drop-down list, choose one of the following settings to specify whether a device that is capable of playing precedence tones will use the capability when it places an MLPP precedence call:

• • Default—This device inherits its MLPP indication setting from its device pool.

  • Off—This device does not handle nor process indication of an MLPP precedence call.

  • On—This device does handle and process indication of an MLPP precedence call.

Step 6

From the MLPP Preemption drop-down list, choose one of the following settings to specify whether a device that is capable of preempting calls in progress will use the capability when it places an MLPP precedence call:

• • Default—This device inherits its MLPP preemption setting from its device pool.

  • Disabled—This device does not allow preemption of lower precedence calls to take place when necessary for completion of higher precedence calls.

  • Forceful—This device allows preemption of lower precedence calls to take place when necessary for completion of higher precedence calls.

Step 7

Click Save.

Step 1

In Cisco Unified CM Administration, choose Device > Device Settings > Default Device Profile.

Step 2

Perform one of the following tasks:

• To modify the settings for an existing default device profile, choose an existing default device profile from the Device Profile Defaults section.
• To add a new default device profile, choose a device profile type from the drop-down list, click Next, choose a device protocol, and then click Next.

Step 3

From the MLPP Domain drop-down list, choose an MLPP domain that you configured to associate to the device.

Step 4

From the MLPP Indication drop-down list, choose one of the following settings to specify whether a device that is capable of playing precedence tones will use the capability when it places an MLPP precedence call:

• Default—This device inherits its MLPP indication setting from its device pool.
• Off—This device does not handle nor process indication of an MLPP precedence call.
• On—This device does handle and process indication of an MLPP precedence call.

Step 5

From the MLPP Preemption drop-down list, choose one of the following settings to specify whether a device that is capable of preempting calls in progress will use the capability when it places an MLPP precedence call:

• Default—This device inherits its MLPP preemption setting from its device pool.
• Disabled—This device does not allow preemption of lower precedence calls to take place when necessary for completion of higher precedence calls.
• Forceful—This device allows preemption of lower precedence calls to take place when necessary for completion of higher precedence calls.

Step 6

Click Save.