Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Updated: September 28, 2026
Want to summarize with AI?
Log inConfigure ready to send (RTS) mode settings on dot11radio interfaces using CLI commands.
Configure RTS mode to control ready to send protection on wireless interfaces, either by disabling RTS protection or enabling it with a specific threshold value.
RTS mode configuration allows you to manage wireless transmission protection mechanisms on dot11radio interfaces.
To disable ready to send (RTS) mode, use the following CLI command:
Device# configure dot11radio <interface> rts <disable>To enable RTS with threshold value, use the following CLI command:
Device# configure dot11radio <interface> rts enable <threshold>The threshold range is from 0 to 2346.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.