Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Updated: September 28, 2026
Want to summarize with AI?
Log inConfigure channel bandwidth settings for radio interfaces using CLI commands.
This task configures the channel bandwidth for radio interfaces to optimize wireless network performance and manage spectrum usage.
Channel bandwidth configuration is performed on radio interfaces to set the appropriate bandwidth for wireless communication. Different radio interfaces support different bandwidth options depending on their capabilities.
Use the configure dot11Radio interface command to configure the radio interface number.
Device# configure dot11Radio 1The valid values are 1 and 2.
Use the configure dot11Radio interface band-width bandwidth command to set channel bandwidth.
Device# configure dot11Radio 1 band-width 20Radio 1 supports 20, 40, and 80 MHz bandwidths.
Radio 2 supports 20, 40, 80, and 160 MHz bandwidths.
Use the end command to return to privileged EXEC mode.
Device# endNeed help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.