Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x

Configure static IPv6 address with EUI-64

Updated: September 28, 2026

Want to summarize with AI?

Configures a static IPv6 address with EUI-64 format on an access point using the configure AP address ipv6 static command with the eui-64 parameter.

Configure the static IPv6 address with EUI-64 on the access point.

Procedure

Use the configure ap address ipv6 static ip command to configure the static IPv6 address with eui-64 on the AP.

Example:

Device# configure ap address ipv6 static fc00::4236:5aff:xxxx:168/64 eui-64

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.