Configure the static IPv6 address without eui-64, gateway, and DNS server address on the AP.
This task configures a static IPv6 address without eui-64, gateway, and DNS server address on the access point.
Use this configuration when you need to manually assign IPv6 network settings to an access point without using the eui-64 interface identifier format.
Procedure
Use the configure ap address ipv6 static ip command to configure the static IPv6 address without eui-64, gateway, and DNS server address on the AP.
Example:
Device# configure ap address ipv6 static fc00::1234:5678:xxxx:def/64 fc00::1 2001:4860:4860::xxxx 2001:4860:4860::xxxx