Enables or disables the GNSS telemetry protocol on the device. This procedure also provides the command to verify the current status of the GNSS telemetry configuration.
Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Updated: September 28, 2026
Want to summarize with AI?
Log inEnables or disables the GNSS telemetry protocol on the device. This procedure also provides the command to verify the current status of the GNSS telemetry configuration.
Use the configure gnss telemetry enable command to enable GNSS telemetry.
Device# configure gnss telemetry enableUse the configure gnss telemetry disable command to disable GNSS telemetry when needed.
Device# configure gnss telemetry disableUse the show gnss telemetry command to view GNSS telemetry status.
Device# show gnss telemetryNeed help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.