Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Updated: September 28, 2026
Want to summarize with AI?
Log in
On this page
Configure Fluidity mode on radio interfaces using CLI commands to enable the desired Fluidity role.
Configure Fluidity mode on radio interfaces to enable enhanced wireless connectivity and performance for vehicle communications.
Fluidity mode is configured on radio interfaces to support specific communication roles.
Follow these steps to configure fluidity using CLI:
Use the configure dot11Radio interface mode fluidity command to configure Fluidity mode on the desired radio interface:
configure dot11Radio 1 mode fluidityNoteAt least one radio interface should be in Fluidity mode.
For Vehicle role, configure both radios in Fluidity mode:
configure dot11Radio 1 mode fluidity
configure dot11Radio 2 mode fluidityIf the desired Fluidity role is Vehicle both radios should be in Fluidity mode.
Configure the Fluidity role to establish whether the device operates in infrastructure mode, vehicle mode, or as a wireless relay.
The Fluidity role determines how the device functions within the network topology. Infrastructure mode provides fixed network services, while vehicle modes support mobile connectivity with automatic or manual ID selection.
Use the configure fluidity id command to configure the Fluidity role (infrastructure or mobile).
Device# configure fluidity id
Use the configure fluidity id [vehicle-auto | infrastructure| vehicle-id| wireless-relay] command to configure Fluidity id mode.
Device# configure fluidity id wireless-relayMode is one of the following values vehicle-auto - vehicle mode with automatic vehicle ID selection vehicle ID - (alphanumeric) vehicle mode with manual ID. infrastructure - infrastructure mode wireless-relay - wireless infrastructure with no ethernet connection to the backhaul
Use the end command to return to privileged EXEC mode.
Device# endUse the write command to save the configuration.
Device# writeNeed help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.