Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x

Save and RESTORE the device SETTINGS

Updated: September 28, 2026

Want to summarize with AI?

Configure device SETTINGS MANAGEMENT by saving current configurations as backup files and restoring saved configurations to devices.

The LOAD OR RESTORE SETTINGS window allows you to perform the following tasks:

Save the device's existing software configuration as a configuration (*.conf) file.
Upload and apply a saved configuration file to the current device.

Note

Device software configuration (*.conf) files are not interchangeable with IW Service configuration setup (*.iwconf) files.

Tip

Saved configuration files are reused for all devices of the same type. These saved configuration files act as configuration backup files to speed up redeployment if you need to replace the damaged device with a new device of the same type.

Procedure

In the MANAGEMENT SETTINGS, click configuration SETTINGS.

The LOAD OR RESTORE SETTINGS window appears.
To download the device's existing configuration SETTINGS to your computer, click Save to download the device configuration (*.conf).
To upload a saved configuration file to the device, click Browse to upload the configuration (*.conf) file to the device.
Click RESTORE to apply the configuration SETTINGS to the device.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.