Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x
Updated: September 28, 2026
Want to summarize with AI?
Log inConfigure a Catalyst IW9167E access point to convert between Wi-Fi mode (CAPWAP AP), URWB mode, and WGB/uWGB mode.
Configure image conversion to change the operational mode of a Catalyst IW9167E access point to meet different network requirements.
Use image conversion when you need to change the operational mode of a Catalyst IW9167E access point between Wi-Fi mode (CAPWAP AP), URWB mode, and WGB/uWGB mode based on your network deployment needs.
To convert from CAPWAP to URWB mode or from WGB/uWGB to URWB mode, use this CLI command:
Device# configure boot mode urwbThe access point reboots and starts up in URWB mode.
To convert from URWB to CAPWAP mode or from WGB/uWGB to CAPWAP mode, use this CLI command:
Device# configure boot mode capwapThe access point reboots and starts up in CAPWAP mode.
To convert from CAPWAP to WGB/uWGB mode or from URWB to WGB/uWGB mode, use this CLI command:
Device# configure boot mode wgbNoteImage conversion performs a full factory reset which completely erases the configuration and data.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.