Cisco Ultra-Reliable Wireless Backhaul Standalone, Software Configuration Guide, Release 26.2.x

Clear the IPv6 gateway and DNS servers configuration

Updated: September 28, 2026

Want to summarize with AI?

Configure the AP to clear IPv6 gateway and DNS servers addresses.

Clear the IPv6 gateway and DNS servers addresses configuration on the AP.

This task removes existing IPv6 gateway and DNS server configurations from an access point.

Procedure

Use the configure ap address ipv6 static ip command to clear the IPv6 gateway and DNS servers addresses configuration on the AP.

Example:

Device# configure ap address ipv6 static fc00::1234:5678:xxxx:def/64 :: :: ::

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.