Manager and Assistant Deletions
This chapter provides information to use
Cisco Unified Communications Manager Bulk Administration (BAT) to delete a specific
manager-assistant association from the
Cisco Unified Communications Manager database.
Delete Specific Manager-Assistant Associations From Cisco Unified Communications Manager
You can delete specific manager-assistant associations from
Cisco Unified Communications Manager.
Before You Begin
You must have a CSV data file that contains the user IDs for
the specific managers and assistants associations that you want to delete.
For example, the assistant with the user ID, jmorgan, is assigned to
two managers with user IDs, rcraig and dbaker. If you want to change the
manager-assistant association, so the assistant, jmorgan is only assigned to
rcraig, you can delete the jmorgan-dbaker association by creating a CSV data
file with the following entry:
Delete Managers/Assistants Configuration window
File Name field, choose the CSV file that you
created for this type of bulk transaction.
||Choose the type of deletion:
associated assistants for one manager
associated managers for one assistant
Job Information area, enter the Job description.
||Choose a delete method. Do one of the following:
Run Immediately to delete the
manager-assistant associations immediately.
Run Later to delete the manager-assistant
associations at a later time.
Submit to create a job for deleting the
required manager-assistant associations.
Job Configuration window to schedule
and/or activate this job.