System Management Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases

PDF

System Management Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases

Enable BRIDGE-MIB trap notifications

Updated: June 12, 2026

Want to summarize with AI?

Learn how to enable BRIDGE-MIB trap notifications on your router to send SNMP events related to network bridges to your SNMP management system.

Enable SNMP management systems to detect and respond to bridge-related events on your router through BRIDGE-MIB trap notifications.

Enabling BRIDGE-MIB trap notifications allows network monitoring tools to receive updates about changes or issues with network bridges, helping with faster troubleshooting and network stability.

Before you begin

SNMP is configured on your router.

Procedure

Enable BRIDGE-MIB trap notifications.

Example:

Router#configure
Router(config)#snmp-server traps bridgemib
Router(config)#commit

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.