System Management Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases

PDF

System Management Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases

Configuring a HTTPS Proxy Server

Updated: June 12, 2026

Want to summarize with AI?

Configures an HTTPS proxy server for Call Home to enable secure communication and data transit through a designated proxy gateway.

This task enables the user to configure a HTTPS Proxy Server.

Procedure

	1.	call-home Example: `Router(config)# call-home` Enters Call Home configuration mode.
	2.	http-proxy proxy-server-name port port-number Example: `Router(config)#http-proxy p1 port 100` Configures the port for the specified HTTPS proxy server. Range is 1 to 65535.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring a HTTPS Proxy Server

Procedure

Example:

Example: