System Management Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases

PDF

System Management Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases

Configuring Call Home to use VRF

Updated: June 12, 2026

Want to summarize with AI?

Configures Call Home to operate within a specific Virtual Routing and Forwarding (VRF) instance to enable network segmentation for alert data, noting that this functionality is exclusively supported for HTTPS transport methods.

Procedure

	1.	call-home Example: `Router(config)#call-home` Enters Call Home configuration mode.
	2.	vrf vrf-name Example: `Router(config-call-home)#vrf v1` Configures call home for the specified VRF. VRF works only for the http transport method. It does not work for the email transport method.

Need help?

Open a support case

(Requires a Cisco Service Contract)

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Configuring Call Home to use VRF

Procedure

Example:

Example: