NAT Policy Management

The following topics describe how to manage NAT policies for your Firepower System:

Managing NAT Policies


Smart License	Classic License	Supported Devices	Supported Domains	Access
Any	Control	7000 & 8000 Series FTD	Any	Access Admin Administrator Network Admin

In a multidomain deployment, the system displays policies created in the current domain, which you can edit. It also displays policies created in ancestor domains, which you cannot edit. To view and edit policies created in a lower domain, switch to that domain.

Administrators in ancestor domains can target NAT policies to devices in descendant domains, which descendant domains can use or replace with customized local policies. If a NAT policy targets devices in different descendant domains, administrators in the descendant domains can view information about target devices belonging to their domain only.

Procedure

Step 1

Choose Devices > NAT .

Step 2

Manage your NAT policies:

Copy — Click copy () next to the policy you want to copy; see Copying NAT Policies.
Create — Click New Policy; see Creating NAT Policies.

Delete — Click delete () next to the policy you want to delete, then click OK. When prompted whether to continue, you are also informed if another user has unsaved changes in the policy.

Caution

After you have deployed a NAT policy to a managed device, you cannot delete the policy from the device. Instead, you must deploy a NAT policy with no rules to remove the NAT rules already present on the managed device. You also cannot delete a policy that is the last deployed policy on any of its target devices, even if it is out of date. Before you can delete the policy completely, you must deploy a different policy to those targets.

Deploy—Click Deploy; see Deploy Configuration Changes.
Edit — Click edit (); see Configuring NAT Policies.
Report—Click the report icon (); see Generating Current Policy Reports.

Creating NAT Policies


Smart License	Classic License	Supported Devices	Supported Domains	Access
Any	Control	7000 & 8000 Series FTD	Any	Access Admin Administrator Network Admin

When you create a new NAT policy you must, at minimum, give it a unique name. Although you are not required to identify policy targets at policy creation time, you must perform this step before you can deploy the policy. If you apply a NAT policy with no rules to a device, the system removes all NAT rules from that device.

Procedure

Step 1	Choose Devices > NAT .
Step 2	From the New Policy drop-down list, choose one of the following: Firepower NAT for 7000 & 8000 Series devices. Threat Defense NAT for FTD devices.
Step 3	Enter a unique Name. In a multidomain deployment, policy names must be unique within the domain hierarchy. The system may identify a conflict with the name of a policy you cannot view in your current domain.
Step 4	Optionally, enter a Description.
Step 5	Choose the devices where you want to deploy the policy: Choose a device in the Available Devices list, and click Add to Policy. Click and drag a device from the Available Devices list to the Selected Devices list. Remove a device from the Selected Devices list by clicking delete () next to the device.
Step 6	Click Save.

What to do next

Deploy configuration changes; see Deploy Configuration Changes.

Configuring NAT Policies


Smart License	Classic License	Supported Devices	Supported Domains	Access
Any	Control	7000 & 8000 Series FTD	Any	Access Admin Administrator Network Admin

If you change the type of an interface to a type that is not valid for use with a NAT policy that targets a device with that interface, the policy labels the interface as deleted. Click Save in the NAT policy to automatically remove the interface from the policy.

Note

Rule attributes differ by NAT policy type. When adding or editing rules, click ? in the dialog box for more information, or see the relevant chapter: Network Address Translation (NAT) for Firepower Threat Defense or NAT for 7000 and 8000 Series Devices.

Procedure

Step 1

Choose Devices > NAT .

Step 2

Click edit () next to the NAT policy you want to modify.

If a view icon () appears instead, the configuration belongs to an ancestor domain, or you do not have permission to modify the configuration.

Step 3

Configure your NAT policies:

To modify the policy name or description, click the Name or Description field, delete any characters as needed, then enter the new name or description. In a multidomain deployment, policy names must be unique within the domain hierarchy. The system may identify a conflict with the name of a policy you cannot view in your current domain.
To manage policy targets, see Configuring NAT Policy Targets.
To save your policy changes, click Save.
To add a rule to a policy, click Add Rule.
To edit an existing rule, click edit () next to the rule.
To delete a rule, click delete () next to the rule, then click OK.
To enable or disable an existing rule, right-click a rule, choose State, and choose Disable or Enable.
(Firepower NAT only) To display the configuration page for a specific rule attribute, click the name or value in the column for the condition on the row for the rule. For example, click the name or value in the Source Networks column to display the Source Network page for the selected rule.

What to do next

Deploy configuration changes; see Deploy Configuration Changes.

Configuring NAT Policy Targets


Smart License	Classic License	Supported Devices	Supported Domains	Access
Any	Control	7000 & 8000 Series FTD	Any	Access Admin Administrator Network Admin

You can identify the managed devices you want to target with your policy while creating or editing a policy. You can search a list of available devices, 7000 or 8000 Series stacks, and high-availability pairs, and add them to a list of selected devices.

You cannot target stacked devices running different versions of the Firepower System (for example, if an upgrade on one of the devices fails).

Procedure

Step 1	Choose Devices > NAT .
Step 2	Click edit () next to the NAT policy you want to modify. If a view icon () appears instead, the configuration belongs to an ancestor domain, or you do not have permission to modify the configuration.
Step 3	Click Policy Assignments.
Step 4	Do any of the following: To assign a device, stack, high-availability pair, or device group to the policy, select it in the Available Devices list and click Add to Policy. You can also drag and drop. To remove a device assignment, click delete () next to a device, stack, high-availability pair, or device group in the Selected Devices list.
Step 5	Click OK.

What to do next

Deploy configuration changes; see Deploy Configuration Changes.

Copying NAT Policies


Smart License	Classic License	Supported Devices	Supported Domains	Access
Any	Control	7000 & 8000 Series FTD	Any	Access Admin Administrator Network Admin

You can make a copy of a NAT policy. The copy includes all policy rules and configurations.

In a multidomain deployment, you can copy policies from current and ancestor domains.

Procedure

Step 1	Choose Devices > NAT .
Step 2	Click copy () next to the NAT policy you want to copy.
Step 3	Enter a unique Name for the policy. In a multidomain deployment, policy names must be unique within the domain hierarchy. The system may identify a conflict with the name of a policy you cannot view in your current domain.
Step 4	Click OK.

Firepower Management Center Configuration Guide, Version 6.1

Bias-Free Language

Book Title

Firepower Management Center Configuration Guide, Version 6.1

Chapter Title