Describes the supported traffic, SID counting, byte measurement, telemetry, collection intervals, and operational restrictions that affect SRv6 accounting results.
Supported traffic types
-
IPv6 packets.
-
SRv6 VPNv4
-
SRv6 VPNv6
-
SRv6 INETv4
-
SRv6 INETv6
SRv6 packet accounting behavior
-
SRv6 packets with the local SID as the top SID.
-
If the top SID is a local uN, traffic is counted against the remote locator prefix of the next SID.
-
Traffic is not counted if the top SID is a local uA.
-
Measurement and counting details
-
Ethernet header is considered for bytes accounting.
-
SRv6 traffic accounting does not count locally generated control plane packets such as ping to the remote locator.
-
Packets aren’t counted if the local uA is the top SID.
Configuration requirements
-
Supports a minimum telemetry pull interval of 30 seconds.
Configuration requirements
-
SRv6 traffic accounting is not supported with SRv6 TE policy.
-
No additional MIBs are supported to retrieve SRv6 traffic statistics. We recommend to use telemetry through the newly added sensor-path in
Cisco-IOS-XR-fib-common-operto retrieve these statistics.