Segment Routing v6 Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases
Is this content helpful?
Thank you for your feedback. Your response has been recorded.
AI responses are currently only available to logged in users. Log in
Only ask questions about this document. To ask questions about this product as a whole, go to Technical Documentation .
Suggestions
Sorry, we couldn't generate a response for this query.
Segment Routing v6 Configuration Guide for Cisco 8000 Series Routers, Cisco IOS XR Releases
Updated: September 8, 2026
Want to summarize with AI?
Log inIdentifies the supported range and default value of the RIB update delay that determines how long temporary microloop-avoidance paths remain active.
The Routing Information Base (RIB) update delay value specifies the amount of time the node uses the microloop avoidance policy before updating its forwarding table. The delay-time range is from 1 to 60000 milliseconds; the default value is 5000.
Need help?
(Requires a Cisco Service Contract)
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.