Lists supported hardware and SRv6 capabilities, including IGP, TI-LFA, microloop avoidance, Flex-Algo, and OAM, and identifies unsupported platforms, interfaces, and encapsulation behaviors.
Supported hardware PIDs for SRv6
-
SRv6 is supported on these Cisco 8000 series Q200-based line cards and fixed-port routers:
-
Cisco 8800 with 88-LC0-36FH-M, 88-LC0-36FH, 88-LC0-34H14FH line cards
-
Cisco 8201-32FH
-
Cisco 8102-64H
-
Cisco 8101-32-FH
-
Supported SRv6 features
-
IGP redistribution/leaking between levels
-
Prefix Summarization on ABR routers
-
IS-IS TI-LFA
-
Microloop Avoidance
-
Flex-algo
-
OAM: Ping and traceroute are supported.
Unsupported features for SRv6
-
SRv6 is not supported on Q100-based line cards and fixed-port routers.
-
SRv6 over GRE interface is not supported
-
SRv6 over BVI interface is not supported
-
Egress marking on the outer header during SRv6 encapsulation operations (TI-LFA) is not supported.