Have an account?

  •   Personalized content
  •   Your products and support

Need an account?

Create an account

Cisco SD-WAN operation and deployment

Learn how to create, manage, and operate a secure extensible network using Cisco SD-WAN products.

Enterprise networks comprise a corporation's communications backbone, connecting computers and related devices across complex workgroup networks. Cisco Enterprise Networking courses will cover operation, configuration and verification of your network technologies. These courses will combine interactive instructor lectures with hands-on real lab scenarios.

Courses offered

Category Product Course Delivery options
Application Network Services VWAAS Implementing Cisco Virtual Wide Area Application Services (VWAAS)
This course teaches you how to deploy, configure, operate, maintain, and support a WAN optimization solution using Cisco® Virtual Wide Area Application Services (vWAAS), which provides performance optimization for application data over WAN. You will also learn about Cisco vWAAS optimization technologies, protocols, services, functions, advanced features, and operation.
Networking ASR 9000 Cisco ASR 9000 Series IOS XR 64-Bit Software Migration and Operational Enhancements (IOSXR211)
This course covers the migration from classic 32-bit Cisco IOS® XR software to Cisco IOS XR 64-Bit software on the Cisco® ASR 9000 Series Aggregation Services Routers. This course will also examine the software architecture, boot process, and auto-provisioning of the Cisco IOS XR 64-bit software, as well as showing you how to install Cisco IOS XR and third-party software packages.
Networking Catalyst 9000

Implementing Cisco Catalyst 9000 Switches (ENC9K)

This course introduces you to the architecture, capabilities, and implementation of the Cisco® Catalyst® 9000 switching platform. This hands-on course covers many features of this Cisco IOS® XE platform and describes how to manage devices from a single dashboard called Cisco DNA Center™. 

Networking N/A Cisco IOS XR Broadband Network Gateway Implementation and Verification (IOSXR304)
This course teaches you how to successfully deploy, configure, operate, maintain, and support a Cisco IOS® XR Broadband Network Gateway (BNG) solution. This course will show you how to implement and verify BNG on a Cisco IOS XR device to manage subscriber access.
Networking N/A Engineering Cisco Meraki Solutions, Part 1 (ECMS1)
This course equips you with the knowledge and skills to confidently operate Cisco Meraki deployments. Through a full day of instruction including live demos and guided lab practice, you will learn how to implement core configurations for a full stack solution in the Meraki Dashboard and leverage essential Meraki Dashboard tools for troubleshooting.

 

In-person training
Network Management Carrier Management Cisco Prime Central Intermediate - Administration and Operations (CPCI-AO)
This course introduces you to the Cisco Prime® Central management application. You will learn about the primary components of Cisco Prime Central architecture; how to use the Cisco Prime Central portal; user management; and inventory, customer management, and fault management features.
Network Management Carrier Management Cisco Prime Provisioning (CPP)
This course introduces you to the Cisco Prime® Provisioning system and its features and functions. The course covers the important theoretical concepts on which provisioning is based, and covers the practical knowledge and skills needed to successfully deploy Cisco Prime Provisioning in your network.
Network Management Enterprise Management Managing Enterprise Networks with Cisco Prime Infrastructure (MENPI)
In this course, you will learn how to manage your network with Cisco Prime Infrastructure by adding devices, managing inventory, creating reports, creating wired and wireless device maps, monitoring the network, managing device configurations, managing device compliance, and performing system administration tasks.
Network Management EPN Manager Configuring and Operating Cisco EPN Manager (EPNM100)
This course shows you how to install, provision, monitor, and maintain a packet and optical multilayer network using Cisco® Evolved Programmable Network (EPN) Manager.
Network Management Prime Network Cisco Prime Network Intermediate - Administration and Operations (CPNI-AO)
.This course introduces you to the Cisco Prime® Network management application. You will learn how configure, customize, and effectively use Cisco Prime Network.
Network Management Prime Network Cisco Prime Performance Manager (CPPERF)
This course introduces you to the features of Cisco Prime® Performance Manager and shows you how to successfully deploy and manage Cisco Prime Performance Manager in your network. You will learn the features and benefits of Cisco Prime Performance Manager, how to install it, and how to perform initial configuration tasks.
Network Management Unified Communications Cisco Prime Collaboration Assurance (PCA)
The focus of this course is to provide knowledge about and practice with Cisco Prime Collaboration Assurance functions. Topics include viewing unified communications devices, connectivity, alerts, and events; running diagnostic tests; and monitoring applications, devices, and the service quality of active call streams and completed calls.
Network Management Unified Communications Cisco Prime Collaboration Provisioning (PCP)
This course teaches students how to effectively use the Cisco PCP application to provision Cisco Unified Communications initial deployments. You will also learn how to provide ongoing operational provisioning and activation services for individual subscriber changes.
Optical Networking N/A Cisco Fundamentals of Fiber Optics Technology (FFOT)
Gain an understanding of the fundamentals of fiber optics technology, fiber-cleaning techniques, optical-networking system safety, DWDM fundamentals, and fiber testing and equipment. This course also offers an introduction to the Cisco Optical Networking System 15454 Multiservice Transport Platform and the Cisco Network Convergence System 2000 Series.
Network Programmability   Programming Use Cases for Cisco Digital Network Architecture (DNAPUC)
This course highlights the shift toward the digital enterprise and examines the components, benefits, and use cases of Cisco Digital Network Architecture (Cisco DNA) in an enterprise environment.
Optical Networking N/A Cisco Optical Technology Intermediate (OPT200)
Learn how to operate the ONS 15454 Multiservice Transport Platform network from installation to protection. Covering three shelf types (M12, M6, and M2), the course teaches you to deploy linear and ring-dense DWDM topologies.
Optical Networking N/A Cisco NCS 2000 Series 96-Channel Flex Spectrum (OPT201)
Combining lectures and hands-on labs, this course introduces you to the Cisco Network Convergence System 2000 Series with Cisco FlexSpectrum. Briefly review fiber cleaning and DWDM basics, and learn to design Cisco FlexSpectrum networks using the Cisco Transport Planner tool.
Optical Networking N/A Cisco Optical Technology Advanced (OPT300)
This course gives you the skills you need to deploy advanced features of the Cisco® Optical Networking Services (ONS) 15454 Multiservice Transport Platform (MSTP) and Cisco Network Convergence System (NCS) 2000 Series.
Service Provider Routing ASR 9000 Cisco ASR 9000 Series Aggregation Services Routers Hardware Overview (ASR 9000 HW)
This Cisco On Demand E-Learning course introduces students to the ASR 9000 series. Students learn the important system architecture concepts, features, and functions for the ASR 9000 and explore the hardware components to understand their function in the overall system operation. The course will cover an introduction, a discussion of the chassis, architecture, hardware subsystems, RSP/RP functions and fabric architecture, line cards, and packet flow.
Service Provider Routing ASR 9000 Essentials of Cisco ASR 9000 Series Aggregation Services Router (ASR9KE)
This course introduces you to the features and functions of the Cisco® Aggregation Services Router (ASR) 9000 Series platforms. Through a combination of lecture and hands-on labs, you will gain an understanding of all major aspects of the platform, including hardware, Layer 2 and Layer 3 services, routing protocols including Segment Routing, Layer 2 and Layer 3 multicast, Quality of Service (QoS) features, and network virtualization.
Service Provider Routing CRS-1 
CRS-3 
CRS-X
Cisco Carrier Routing System Hardware Overview (CRS HW)
This Cisco On Demand E-Learning course introduces students to the Cisco CRS-1, CRS-3, and CRS-X carrier routing systems' hardware features and functions. Students learn the important hardware concepts on which the carrier routing system solution is based and gain the practical knowledge and skills to successfully deploy these on a network. Additionally, students learn to verify correct operation of various CRS hardware components, including line card chassis, switch fabric, route processors, and physical layer interface modules (PLIMs).
Service Provider Routing NCS 5000 Network Convergence System 5000 Series Router (NCS5000HW)
This course focuses on the Cisco Network Convergence System (NCS) 5000 Series hardware features. It covers the features and functions of the NCS 5000 Series chassis, hardware architecture, and boot process and features of the Cisco IOS XR 6.0 software.
Service Provider Routing NCS 5500 Network Convergence System 5500 Series Router (NCS5500HW)
This course focuses on the hardware features of Cisco® Network Convergence System (NCS) 5500 Series routers.
Service Provider Routing NCS 6000 Cisco NCS 6000 System Architecture and Hardware Overview NCS 6000 HW (NCS 6000 HW)
This Cisco On Demand E-Learning course introduces students to the NCS 6000 features and functions. Students learn the important system architecture concepts on which the NCS 6000 system is based, explore the hardware components, and understand their function in the overall system operation. The course will cover a general system introduction, a discussion of the line card architecture, switch fabric architecture, how data makes its way through the NCS 6000 system, a review of the new optics utilized by the NCS 6000, and a review of the overall system mechanical components.
Service Provider Routing N/A Implementing Segment Routing on Cisco IOS XR (SEGRTE201)
This course covers the fundamental concepts of Segment Routing (SR), how to configure and verify segment routing within an Interior Gateway Protocol (IGP), and the interworking of Label Distribution Protocol (LDP) with segment routing.
Service Provider Routing N/A Introduction to Cisco IOS XR (IOSXR100)
This course introduces you to the features and functions of the Cisco® Internetwork Operating System (Cisco IOS®) XR Software operating system. You learn the fundamental concepts on which the operating system is based and Cisco IOS XR basic operations, system administration, and troubleshooting.
Service Provider Routing N/A Cisco IOS XR System Administration (IOSXR200)
This course covers the fundamental concepts on which the Cisco® Internetwork Operating System (IOS) XR operating system is based, as well as the knowledge and skills you need to perform system administration tasks using Cisco IOS® XR Software.
Service Provider Routing N/A Cisco IOS XR Basic Troubleshooting (IOSXR201)
This course gives you the knowledge and skills you need to perform basic troubleshooting tasks using Cisco®Internetwork Operating System (IOS) XR Software.
Service Provider Routing N/A Cisco IOS XR 64-Bit Software Operational Enhancements (IOSXR210)
This course covers the software architecture and explores software features of the Cisco XOR XR 64-bit operating system.
Service Provider Routing N/A Cisco IOS XR Layer 3 VPN Implementation and Verification (IOSXR301)
This course shows you how to implement and verify Layer 3 VPN services on a Cisco®Internetwork Operating System (IOS) XR network.
Service Provider Routing N/A Cisco IOS XR Multicast Routing Implementation and Verification (IOSXR302)
This course shows you how to implement multicast routing and multicast VPNs on Cisco® Internetwork Operating System (IOS) XR platforms.
Service Provider Routing N/A Cisco IOS XR Ethernet VPN Implementation and Verification (IOSXR303)
This instructor-led, lab-based, hands-on course covers how to implement and troubleshoot several Ethernet VPN (EVPN) technologies, including EVPN native, EVPN VPWS, PBB EVPN, EVPN IRB, and EVPN VXLAN, on Cisco IOS XR devices.
Software Defined Networking N/A

Implementing Cisco SD-WAN Solutions (SDWAN300)
This course gives you deep-dive training about how to design, deploy, configure, and manage your Cisco® Software-Defined WAN (SD-WAN) solution in a large-scale live network, including how to migrate from legacy WAN to SD-WAN. You will learn best practices for configuring routing protocols in the data center and the branch, as well as how to implement advanced control, data, and application-aware policies.

Software Defined Networking N/A Deploying Cisco SD-Access (ENSDA)
This course course teaches you how to successfully deploy the Cisco® Software-Defined Access (SD-Access) solution in your enterprise network. This advanced-level, instructor-led, lab- based, hands-on course covers SD-Access fundamentals, provisioning, policies, wireless integration, border operations, and migration strategies.
Software Defined Networking N/A Cisco SD-WAN Operation and Deployment (ENSDW)
This course provides an overview of the Cisco® Software-Defined WAN (SD-WAN) solution and SD-WAN components. You will learn how to create, manage, and operate a secure extensible network using Cisco SD-WAN products.
Software Defined Networking N/A Cisco Elastic Services Controller (ESC300)
This course teaches you how to install and maintain Cisco® Elastic Services Controller (ESC) in OpenStack and VMware environments, and how to integrate Cisco ESC with Cisco Network Services Orchestrator (NSO).
Software Defined Networking N/A Cisco Network Services Orchestrator Operations (NSO200)
This course focuses on the Cisco® NSO system and service maintenance tasks. You will learn how to perform tasks such as basic NSO system troubleshooting, how to upgrade services and Network Element Driver (NED) packages, how to perform service backups and restores, and basic system monitoring and reporting.
Software Defined Networking N/A NSO Essentials for Programmers and Network Architects (NSO201)
This course introduces you to Cisco® Network Services Orchestrator (NSO). You will learn to install Cisco NSO and use it to manage devices and create services based on YANG templates with XPath. 
Software Defined Networking N/A NSO Advanced for Python Programmers (NSO300)
This course introduces you to developing advanced services using Cisco® Network Services Orchestrator (NSO) programmability with Python scripting.
Software Defined Networking

N/A Cisco NSO Administration and DevOps (NSO303)
This course focuses on Cisco® NSO development, operation, and administration tasks. You will learn how to set up, configure, deploy, and maintain a Cisco Network Services Orchestrator solution, and you will learn best practices for using DevOps.
Software Defined Networking N/A WAE Implementation Training (WAE100)
This instructor-led, lab-based, hands-on course introduces learners to the basic knowledge necessary to plan, deploy, configure, and maintain the Cisco WAN Automation Engine (WAE) solution. Extensive hands-on labs help learners gain the necessary skills to install and maintain Cisco WAE systems.
Software Defined Networking N/A Operating and Implementing Cisco WAN Automation Engine (WAE200)
This course gives you the basic knowledge necessary to plan, deploy, configure, and maintain the Cisco® WAN Automation Engine (WAE) solution. Extensive hands-on labs help you gain the necessary skills to install and maintain Cisco WAE systems.

Sorry, no results matched your search criteria(s). Please try again.

Get help

Want to learn more or schedule a class?