Cisco NCS 2000 Deploying 96-Channel Flex Spectrum (OPT201)

The Cisco NCS2000 Deploying 96-Channel Flex Spectrum (OPT201) training shows you how to plan, configure, and control optical networks using the Cisco® Network Convergence System (NCS) 2000 series Flex Spectrum platform.

This training teaches you how to design Flex Spectrum networks with multi-degree Reconfigurable Optical Add-Drop Multiplexer (ROADM) multi-shelf nodes using the Cisco Transport Planner (CTP) software.

Ways to get this training

Instructor-led training

Join lively classroom-style learning and discussions, online or in person, that are led by Cisco and our Learning Partners.

How you'll benefit

This training will help you:

  • Install the Cisco NCS 2000 series hardware
  • Configure an optical network and circuits using the Cisco Transport Controller (CTC) software
  • Learn which components and configurations take advantage of and/or are required for the Flex Spectrum 96-channel feature
  • Configure optical networks with multidegree ROADM multishelf nodes
  • Configure optical networks with colorless, contentionless, omnidirectional, and MPO cross-connect advanced features
  • Describe and configure the NCS 2000 400-Gbps Xponder line card

Who should enroll

This training is designed for technical professionals who need to know how to deploy a Cisco NCS 2000 Series Dense Wavelength-Division Multiplexing (DWDM) network with Flex Spectrum.

The primary audience for this training includes:

  • Designers
  • Systems engineers and implementation staff
  • Network operations center personnel
  • Technical support personnel who are involved with the deployment, operations, and maintenance of the Cisco NCS 2000 Series
  • Channel partners and resellers

Technology areas

  • Optical
  • Routing and switching

Objectives

  • Describe the hardware and components required and used with the Flex Spectrum feature
  • Design optical networks in the Cisco Transport Planner software
  • Install the hardware, including multishelf nodes
  • Perform node turn-up and create circuits using the Cisco Transport Controller software
  • Configure optical networks with multidegree ROADM multishelf nodes
  • Configure optical networks with colorless, contentionless, omnidirectional, and MPO cross-connect advanced features
  • Describe and configure the NCS 2000 400-Gbps Xponder line card
  • Add a node to an existing DWDM ring
  • Describe the NCS 2000 Troubleshooting Guide
  • Use the features and documentation with Transport Controller to perform maintenance, testing, and basic troubleshooting

Prerequisites

To fully benefit from this training, you should first complete the Cisco Fundamentals of Fiber Optics Technology (FFOT) video training, or have an equivalent level of knowledge and skills.


    Outline

    • DWDM and Flex Spectrum Foundation
    • NCS 2000 Chassis and Cards
    • Design ROADM Networks with CTP
    • Hardware Installation and Multishelf
    • Node Turn-Up and Circuit Creation
    • Advanced Feature Networks and Circuits
    • Testing, Maintenance, and Basic Troubleshooting
    • Spectrum Switched Optical Network

    Lab outline

    • Cisco Transport Controller
    • Cisco Transport Planner
    • Adding a Node to Existing DWDM Ring Network
    • Optical Channel Network Connection (OCHNC) Circuits
    • Optical Channel Client Connection (OCHCC) Circuits
    • Colorless Ports and Circuits
    • Contentionless Circuits
    • Connection Verification
    • Performing the Optical Time Domain Reflectometer (OTDR) Test
    • Maintenance and Performance Monitoring
    • MSTP Troubleshooting
    • Configuring the 400XP card