About this content

Cisco NCS 1010 optical line system

This chapter provides an overview of the Cisco NCS 1010 optical line system, including chassis components, line card variants, EITU interfaces, passive modules, breakout modules, and mux/demux patch panels.

Software setup fundamentals

This chapter explains Cisco NCS 1010 software setup fundamentals, including release types, software download files, and command modes. Use this information to prepare for setup and software upgrade procedures.

Setup procedures

This chapter describes how to set up Cisco NCS 1010, including pre-setup requirements, management access, boot options, NTP synchronization, software and hardware verification, and post-setup user administration.

TACACS+ and RADIUS configuration

This chapter describes TACACS+ and RADIUS configuration for Cisco NCS 1010. It helps readers use AAA concepts, RADIUS and TACACS+ references, and related configuration procedures.

Setup and upgrade workflow

This chapter describes NCS 1010 software upgrades. It helps readers use software setup, installation, and upgrade concepts, references, and procedures.

Classic ZTP deployment

This chapter describes classic ZTP deployment for Cisco NCS 1010. It groups the DHCP, configuration-file, bootscript, logging, and manual ZTP topics used for provisioning.

Software maintenance

This chapter describes managing the NCS 1010. It groups the related concepts, references, and procedures that support IOS XR software maintenance.

Setup and upgrade troubleshooting

This chapter describes troubleshooting NCS 1010 setup and upgrade. It groups the related concepts, references, and procedures that support setup and upgrade troubleshooting.

Disaster recovery

This chapter describes disaster recovery for Cisco NCS 1010, including partition behavior, CPU replacement considerations, and backup ISO image health checks.

BGP configuration

This chapter describes BGP configuration for Cisco NCS 1010, including routing concepts, router identifiers, prerequisites, and procedures for configuring BGP peers.

CDP configurations

This chapter describes CDP configuration for Cisco NCS 1010, including global settings, interface settings, default timers, and monitoring tasks and outputs.

Daisy chain topology

This chapter describes daisy chain topology for Cisco NCS 1010, including management-port configuration, verification, storm control, and DAD settings for nodes.

Access control lists

This chapter describes ACL configuration for Cisco NCS 1010, including ACL behavior, rule application, IPv4 and IPv6 tasks, and verification guidance.

Remote node management

This chapter describes remote node management in NCS 1010. It helps readers use related concepts, references, and procedures for managing remote nodes.

Remote console connection workflow

This chapter describes remote console connection for Cisco NCS 1010. It helps readers use related concepts, references, and procedures for remote access.

Automated file management

This chapter describes automated file management for Cisco NCS 1010. It groups the related concepts, references, and procedures that support automated file management.

Audit log storage and monitoring

This chapter describes audit logging and monitoring for Cisco NCS 1010. It helps readers use audit concepts, storage notes, monitoring guidance, and configuration procedures.

Process memory management

This chapter describes process memory management for Cisco NCS 1010. It helps readers use core dump storage concepts, references, and procedures.