This section explains OSPF neighbor discovery for Cisco NCS 1010. Use it to understand the feature behavior, requirements, and setup context before you configure or verify remote node management.
The OSPF neighbor discovery indicates the successful connection between OLT and ILA node.
Details
Following is the sample CLI:
RP/0/RP0/CPU0:P2C_DT_02#sh ospf neighbor
Tue Jul 26 07:31:29.532 UTC
* Indicates MADJ interface
# Indicates Neighbor awaiting BFD session up
Neighbors for OSPF 1
Neighbor ID Pri State Dead Time Address Interface
10.3.3.20 1 FULL/ - 00:00:35 10.8.1.20 GigabitEthernet0/0/0/0
Neighbor is up for 00:00:42
Total neighbor count: 1
RP/0/RP0/CPU0:P2C_DT_02#
In the above CLI,
-
198.51.100.1 is the neighbor IP address
-
10.8.1.21 is the OSC interface IP address