This chapter describes troubleshooting NCS 1010 setup and upgrade. It groups the related concepts, references, and procedures that support setup and upgrade troubleshooting.
Use this reference to review troubleshoot NCS 1010 setup and upgrade.
Use the procedures in this section to troubleshoot NCS 1010 bring-up, software upgrade or downgrade by understanding the problem, probable cause, and the solution.
-
The following image shows the tasks involved in finding solutions to NCS 1010 setup and upgrade issues:
-
This section contains the following topics:
NCS 1010 boot failure recovery
This section provides details about recovering Cisco NCS 1010 from boot failure. Use it to review recovery methods for nonresponsive systems during setup or upgrade troubleshooting.
Recover password
Use this procedure to recover the password on Cisco NCS 1010. It helps restore access when incorrect or lost login credentials prevent device access.
Resolve insufficient disk space during software installation
Use this procedure to resolve insufficient disk space during software installation. It helps recover from package installation failures caused by limited available storage.
Recover frozen console prompt
Use this procedure to recover a frozen console prompt. It helps restore console access when the prompt stops responding during setup or troubleshooting.