This chapter describes remote node management in NCS 1010. It helps readers use related concepts, references, and procedures for managing remote nodes.
Remote node management details for NCS 1010
This section provides details about remote node management in NCS 1010, including context that helps readers use related concepts, references, and procedures.
Remote node management with OSC
This section explains remote node management using OSC for Cisco NCS 1010. Use it to understand the feature behavior, requirements, and setup context before you configure or verify remote node management.
Remote node management prerequisites
This section provides details about remote node management prerequisites for Cisco NCS 1010. Use it to review the required conditions before you configure remote node management.
DHCP relay configuration for OLT node
This section explains the DHCP relay configuration for an OLT node. Use it to understand the feature behavior, requirements, and setup context before you configure or verify remote node management.
Loopback IP address for OSC interface
This section explains the loopback IP address for the OSC interface. Use it to understand the feature behavior, requirements, and setup context before you configure or verify remote node management.
OSPF neighbor discovery
This section explains OSPF neighbor discovery for Cisco NCS 1010. Use it to understand the feature behavior, requirements, and setup context before you configure or verify remote node management.
ILA node configuration
This section provides details about configuring an ILA node for Cisco NCS 1010. Use it to review the command example and settings that support remote node management.
OLT node configuration
This section provides details about configuring an OLT node for Cisco NCS 1010. Use it to review the command example and settings that support remote node management.