This section provides details about supported SNMP MIBs on NCS 1001 and links to tools and documentation for MIB definitions, SNMP configuration, and SNMP best practices.
Use this reference to identify the supported MIBs and locate documentation for SNMP object definitions and configuration guidance.
Supported SNMP MIBs
These MIBs are supported on NCS 1001:
-
CISCO-OPTICAL-OTS-MIB
-
CISCO-CONFIG-MAN-MIB
-
CISCO-FLASH-MIB
-
CISCO-ENTITY-REDUNDANCY-MIB
-
CISCO-SYSTEM-MIB
-
CISCO-ENTITY-ASSET-MIB
-
EVENT-MIB
-
DISMAN-EXPRESSION-MIB
-
CISCO-FTP-CLIENT-MIB
-
NOTIFICATION-LOG-MIB
-
CISCO-RF-MIB
-
CISCO-TCP-MIB
-
UDP-MIB
-
CISCO-OTN-IF-MIB
-
CISCO-ENHANCED-MEMPOOL-MIB
-
CISCO-PROCESS-MIB
-
CISCO-SYSLOG-MIB
-
ENTITY-MIB
-
CISCO-ENTITY-FRU-CONTROL-MIB
-
CISCO-IF-EXTENSION-MIB
-
RMON-MIB
-
CISCO-OPTICAL-MIB
-
CISCO-ENTITY-SENSOR-MIB
CISCO-OPTICAL-OTS-MIB contains the SNMP traps for all the specific NCS 1001 alarms that are not related to other platforms. These alarms are reported through SNMP traps with appropriate severity and hardware port notification. Other MIBs such as CISCO-OPTICAL-MIB contains the SNMP traps for alarms that can also be raised on other platforms, for example, NCS 1002.
SNMP MIB documentation resources
This table maps each SNMP task to its documentation resource.
| Task |
Resource |
|---|---|
| Determine the MIB definitions |
For details about MIB definitions, see SNMP Object Navigator. |
| Configure SNMP |
For details about SNMP configuration, see Configure SNMP. |
| Understand SNMP best practices |
For details about the recommended order of SNMP query, maximum cache hit, and SNMP retry and timeout recommendations, see SNMP Best Practices. |