Use this procedure to enable optical OTS SNMP trap notifications on Cisco NCS 1001 and commit the configuration so that platform-specific alarms are reported through SNMP.
Enable SNMP traps for optical OTS alarms when Cisco NCS 1001 specific alarms must be reported to an SNMP management system.
CISCO-OPTICAL-OTS-MIB contains SNMP traps for Cisco NCS 1001 specific alarms that are not related to other platforms.
Procedure
| 1. | Enter the configuration mode. Example: |
|
| 2. | Use the snmp-server traps optical-ots command to enable optical OTS SNMP traps. Example: |
|
| 3. | Commit the configuration. |
Optical OTS SNMP traps are enabled, and the committed configuration reports relevant Cisco NCS 1001 alarms through SNMP.
What to do next
Verify that the SNMP management system receives trap notifications for the expected alarm conditions.