Manage OTS and OTS OCH controllers, span loss, dual IP addressing, and LLDP over OSC functions on Cisco NCS 1001 systems.
Controllers
This topic explains controller identifiers and the rack, slot, instance, and port values that identify the optical controller locations in the system.
OTS controllers
This topic explains Optical Transport Section controllers and the hardware capabilities that determine which optical parameters can be enabled, displayed, or configured.
Span loss calculation
This topic explains how span loss calculation uses EDFA transmit and receive power values to calculate span losses between NCS 1001 systems.
Dual IP addresses
This topic explains dual independent XR management interfaces and the requirements for RJ45 and optical SFP management connectivity on NCS systems.
OTS OCH controllers
This topic explains OTS OCH controllers, channel granularity, wavelength information, and the low-power threshold parameters available on OCM hardware interfaces.
LLDP over OSC
This topic provides release information and sample neighbor output for LLDP support on optical supervisory channel management interfaces in point-to-point links.