- About this Guide
- ASR 5000 Hardware Platform Overview
- Installation Procedure Overview
- Chassis Installation
- Application Card Installation
- Line Card Installation
- Cabling the Switch Processor Input/Output Line Card
- Cabling the Fast Ethernet (10/100) Line Card
- Cabling the Gigabit Ethernet Line Cards
- Cabling the Optical (ATM) Line Cards
- Cabling the Channelized Line Cards
- Cabling the Power Filter Units
- Applying Power and Verifying the Installation
- System Monitoring
- Adding Application and Line Cards to an Existing Installation
- Removing and Installing SMC PC Cards
- Replacing the Chassis Air Filter
- Replacing a Power Filter Unit
- Replacing Upper or Lower Fan Tray
- Replacing Application Cards
- Replacing Line Cards
- Technical Specifications
- Safety, Electrical and EMC Certifications
- Environmental Specifications
- Hardware Product Support Matrix
- Preparing a Full-Height Line Card Slot
- RMA Shipping Procedures
- Spare Component Recommendations
Contents
Spare Component Recommendations
This appendix provides a recommended quantity of spare components to be stocked as part of a sparing program for the ASR 5000. This information should only be used as a guideline for designing a sparing program that meets your company's design, deployment, and availability goals.
Only fully-trained personnel, on-site or field engineering resources should exchange the Field Replaceable Units (FRUs) listed below.
Based on industry-leading redundancy and failover features incorporated within the system, Cisco recommends that the following minimum spare parts levels for any ASR 5000 deployment.
| Component Name | Minimum number of spares | For every "n" number of deployed components |
|---|---|---|
| ASR 5000 Chassis with Midplane | 1 | 20 |
| Power Filter Unit (165A) | 1 | 30 |
| System Management Card (SMC) | 1 | 10 |
| Packet Services Card (PSC2 or PSC3) | 1 | 12 |
| Ethernet 1000/Quad Gig-E (QGLC) Card | 1 | 20 |
| 10 Gigabit Ethernet Line Card (XGLC) | 1 | 20 |
| Optical Line Card (OLC2) | 1 | 20 |
| Channelized Line Card (CLC2) | 1 | 20 |
| Switch Processor I/O Card (SPIO) | 1 | 18 |
| Redundancy Crossbar Card (RCC) | 1 | 30 |
| Ethernet 10/100 Line Card (FLC2) | 1 | 25 |
| Gigabit Ethernet Line Card (GLC2) | 1 | 25 |
| Upper Fan Tray Unit | 1 | 8 |
| Lower Fan Tray Unit | 1 | 5 |
| Particulate Air Filter | 1 | 1 |
Spare Component Recommendations
This appendix provides a recommended quantity of spare components to be stocked as part of a sparing program for the ASR 5000. This information should only be used as a guideline for designing a sparing program that meets your company's design, deployment, and availability goals.
Only fully-trained personnel, on-site or field engineering resources should exchange the Field Replaceable Units (FRUs) listed below.
Based on industry-leading redundancy and failover features incorporated within the system, Cisco recommends that the following minimum spare parts levels for any ASR 5000 deployment.
| Component Name | Minimum number of spares | For every "n" number of deployed components |
|---|---|---|
| ASR 5000 Chassis with Midplane | 1 | 20 |
| Power Filter Unit (165A) | 1 | 30 |
| System Management Card (SMC) | 1 | 10 |
| Packet Services Card (PSC2 or PSC3) | 1 | 12 |
| Ethernet 1000/Quad Gig-E (QGLC) Card | 1 | 20 |
| 10 Gigabit Ethernet Line Card (XGLC) | 1 | 20 |
| Optical Line Card (OLC2) | 1 | 20 |
| Channelized Line Card (CLC2) | 1 | 20 |
| Switch Processor I/O Card (SPIO) | 1 | 18 |
| Redundancy Crossbar Card (RCC) | 1 | 30 |
| Ethernet 10/100 Line Card (FLC2) | 1 | 25 |
| Gigabit Ethernet Line Card (GLC2) | 1 | 25 |
| Upper Fan Tray Unit | 1 | 8 |
| Lower Fan Tray Unit | 1 | 5 |
| Particulate Air Filter | 1 | 1 |