Cisco C9610 Series Smart Switches Hardware Installation Guide

PDF

Power and heat values

Updated: February 5, 2026

Overview

Describes the power requirements, heat dissipation for the fan tray, line cards, and the supervisor modules of Cisco C9610 switches.

These tables provide the power and heat dissipation data. Unless otherwise noted, the information in the tables is measured under fully loaded conditions (with transceivers installed).

Table 1. Fan tray power requirements and heat dissipation

PID

AC-input power in Watts

DC-output in Watts

Current @ 90V

Current @ 120V

Current @ 180V

Current @ 240V

Heat Diss. in BTU / hr.

C9610-FAN

1111

1000

12.4

9.3

6.2

4.7

3791

Table 2. Line card power requirements and heat dissipation

PID

AC-input power in Watts

DC-output in Watts

(Power requested)

Current @ 90V

Current @ 120V

Current @ 180V

Current @ 240V

Heat Diss. in BTU / hr.

C9610-LC-40YL4CD

466

420

5.2

3.9

2.6

1.95

1590

C9610-LC-32CD

495

450

5.6

4.2

2.8

2.1

1689

C9600-LC-40YL4CD

466

420

5.2

3.9

2.6

1.95

1590

C9600-LC-48TX

350

315

3.9

3.0

2.0

1.5

1195

C9600X-LC-32CD

495

450

5.6

4.2

2.8

2.1

1689

C9600X-LC-56YL4C

495

450

5.6

4.2

2.8

2.1

1689

Table 3. Supervisor module power requirements and heat dissipation

PID

AC-input power in Watts

DC-output in Watts

(Power requested)

Current @ 90V

Current @ 120V

Current @ 180V

Current @ 240V

Heat Diss. in BTU / hr.

C9610-SUP-3

2444

2200

27.15

20.37

13.58

10.18

8339

C9610-SUP-3XL

2444

2200

27.15

20.37

13.58

10.18

8339