Cisco C9610 Series Smart Switches Hardware Installation Guide

PDF

Unpack the switch

Updated: February 5, 2026

Overview

The process to unpack the Cisco C9610 switch.

Check the contents of the shipping container.

Procedure

1.

Check the contents of the accessory kit. Verify that you have received all the listed equipment, including any optional equipment that you have ordered, such as, network interface cables, transceivers, or special connectors.
2.

Check the modules in each slot. Ensure that the configuration matches the packing list and that all of the specified interfaces are included.
3.

Store the shipping carton.

Tip

Do not discard the shipping container when you unpack the switch. Flatten the shipping cartons and store them with the pallet. You will require these containers if you have to move or ship the switch in the future.